All Pro Solutions HERA-6 User Manual download pdf (Page 47)

HERA LS Series CD/DVD Duplication System / User Manual

Max Failure per Job

[030] OK?

Setup

14. Max Failure per Job

Setup

15.Max Failure per Drive

Max Failure per Drive

[030] OK?

Use this setting to set the maximum failures the autoloader is allowed per job. Once the maximum is reached, the

job will be stopped. The default value for this setting is 30.

Use the Up or Down button to select the Max Failure per Job menu and

press the ENT/Enter button to enter that menu.

You can select numbers between 1 to 999 by pressing the Up or Down button:

To specify the number of maximum failures per job, you need to enter/input a

three-digit number.

If you need to specify a number that is less than three digits, fill the leading spaces with zeros (any leading zeros

will be skipped). Examples of three-digit numbers are “034” (thirty four), or “010” (ten).

To enter the number, you need to use the Up or Down button to select the number for each digit and use the

ENT/Enter button or the ESC/Escape button to move the cursor position right or left. Once you've finished, move

the cursor to “OK” and press the ENT/Enter button. For example, if you want to specify a counter value of 21

(twenty one). The three-digit value would be “021.” To input the desired quantity, do the following:

Make sure the cursor is located at the first position (First blinking position):

 Press the Down button repeatedly until “0” is displayed.

 Press ENT/Enter button once to move the cursor to the next position.

 Press the Down button repeatedly until “2” is displayed.

 Press ENT/Enter button once to move the cursor to the next position.

 Press the Down button repeatedly until “1” is displayed.

 Now, “021” is displayed, press ENT/Enter button once and the cursor moves to “OK”.

Then, press the ENT/Enter button once to submit your maximum failures per job.

13.15 Max Failure per Drive

Use this setting to set the maximum failures each drive is allowed per job. Once the maximum is reached for any

particular drive, that drive will be disabled for the remainder of the job. The default value for this setting is 5.

Use the Up or Down button to select the 14. Max Failure per Drive menu

and press the ENT/Enter button to enter that menu.

You can select numbers between 1 to 999 by pressing the Up or Down button:

To specify the number of maximum failures per drive, you need to enter/input

a three-digit number.

If you need to specify a number that is less than three digits, fill the leading spaces with zeros (any leading zeros

will be skipped). Examples of three-digit numbers are “034” (thirty four), or “010” (ten).

To enter the number, you need to use the Up or Down button to select the number for each digit and use the

ENT/Enter button or the ESC/Escape button to move the cursor position right or left. Once you've finished, move

the cursor to “OK” and press the ENT/Enter button. For example, if you want to specify a counter value of 21

(twenty one). The three-digit value would be “021.” To input the desired quantity, do the following:

Make sure the cursor is located at the first position (First blinking position):

 Press the Down button repeatedly until “0” is displayed.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 61 62

Comments to this Manuals

No comments

All Pro Solutions HERA-6 User Manual Page 47

Comments to this Manuals

Related products and manuals for Media duplicators All Pro Solutions HERA-6